51吃瓜

Procedus machinarum CNC lathe similis est illorum, sed propter factum quod latus CNC simul clampi sunt et continuum machinarum automaticam completa omnes proceduras conversationis, sequentes aspectus notari sunt:

1. Reasonably choose cutting parameters

The reasonable selection of cutting parameters (ap, f, v) plays an important role in fully utilizing the potential of machine tools and cutting performance of cutting tools, achieving high-quality, high-yield, low-cost, and safe operation.

When rough cutting, consider selecting a maximum back cutting amount ap, then choose a larger feed rate f, and finally determine a suitable cutting speed v. Increasing the back cutting amount ap can reduce the number of cutting times, and increasing the feed rate f is beneficial for chip breaking. Therefore, selecting the rough cutting amount based on the above principles is beneficial for improving production efficiency, reducing tool consumption, and reducing processing costs.

During precision machining, high precision and surface roughness are required, and the machining allowance is small and uniform. Therefore, when selecting cutting parameters for precision machining, emphasis should be placed on ensuring machining quality and maximizing productivity on this basis. Therefore, during precision machining, a smaller (but not too small) back cutting amount ap and feed rate f should be selected, and cutting tool materials with high cutting performance and reasonable geometric parameters should be chosen to maximize the cutting speed v.

2. Reasonably choose cutting tools

1) Quando difficile sectionem est, necesse est ferre vasa cum alta fortitudine et bona durabilitate ut conformetur ad necessitates magnorum segregationis atque pascuae temporibus in difficile sectionis.

2) When precision machining, it is important to choose tools with high precision and good durability to ensure the required machining accuracy.

3) To reduce tool changing time and facilitate tool alignment, machine clamped knives and machine clamped blades should be used as much as possible.

3. Reasonably choose fixtures

1) Try to use universal fixtures to clamp workpieces and avoid using specialized fixtures;

2) Aligne optimis positionis parterum ut errores positionis reducant.

4. Determine the processing route

The machining route refers to the motion trajectory and direction of the tool relative to the part during the machining process of the CNC machine tool

1) Should be able to ensure machining accuracy and surface roughness requirements;

2) Effortes faciebantur ut curvatur via machinae et reddat instrumentum vacuum tempore.

5. The relationship between machining route and machining allowance

Nunc, absente amplius utilizationem CNC lathi, excessive allowance in vacuum, sublime allowance continentem latus pellium fabricatum aut proiectum, generale ad processandum in latus ordinaris. Si opus est CNC lathe ad machinas utilizati, attention ad flexibiliam agentiam programmae considerare debet.

6. Puncti clavis instantiae fixturae

In hoc tempore connexio inter hydraulicam et hydraulicam clampionis cylindrum per virgam pullam accipit. Key points for clamping the hydraulic chuck are as follows: first, use a handle to remove the nut on the hydraulic cylinder, remove the pull tube, and extract it from the rear end of the spindle. Then, use a handle to remove the chuck fixing screw to remove the chuck.